Ceramic and resin-bonded CBN profile grinding discs

Name: Ceramic and resin-bonded CBN profile grinding discs
Brand: TYROLIT

for tungsten carbide and HSS

Ceramic and resin-bonded CBN grinding wheels for profile grinding of tungsten carbide and HSS workpieces. Suitable for automatic sawing machines.

Saw sharpening tools

Tungsten carbide

HSS

High stock removal rate

High profile retention

Wide assortment

Dealer Search

Variants

· 5 Typennummern

Specification

Technical Data

Abrasive grainCBN (B)

Werkzeug fürSaw sharpening tools

MaterialienTungsten carbide, HSS

Features

High stock removal rate—Sintered aluminium oxide mixtures achieve increased stock removal rates on HSS compared to conventional aluminium oxide.

High profile retention—A high diamond concentration guarantees good profile retention for tungsten carbide tools. This is optimised by a coarser grain during pre-grinding.

Broad assortment—With the wheels available in our assortment, you can machine the workpiece right from the pre-grinding to the fine-grinding stage thanks to optimised grit sizes.

Description

For profile grinding of HSS you can use aluminium oxide or CBN wheels. Tungsten carbide should however only be ground using diamond. For pre-grinding we recommend using grit size 54 in aluminium oxide and sintered aluminium oxide mixture. Grit size 100 should be used for finish grinding and fine profiles, or alternatively B151 in CBN. Finer grit sizes are usually used for tungsten carbide.