TYROLIT diamond dry core drills are especially suited for the drilling of installation openings and breaking through with diameters of 32 - 152 mm.

The design of these tools allows the application of percussion machines without water supply. Naturally, it is possible to machine lightly reinforced concrete without any problem.

• Large application spectrum – the most widely varying material are able to be machined
• Ideal for the setting of all standard outlets
• Dry working without coolant
• Roof-shaped design of segments enables exact centering
• Usable with and without carbide center drill
• Usable length 60 and 150 mm
• Laser welded segments guarantee highest segment adhesion
• Outstanding dust removal through special ejection slots
• Fixing shafts suitable for all 13 mm chucks
• Centering shaft for exact drilling of two sides up to 300 mm wall thickness

Dry application Application occurs on percussion machines with drive powers of 1100 up to 1400 Watts Advantage of application with percussion – Cooling of segments – Optimum dust removal – Best drill feed Attention: Do not use an electropneumatic drill hammer
Useable length 60 mm especially for electric installations - e.g. wall sockets, feeder boxes, etc   Useable length 150 mm for breaking through walls (with centering shaft up to max. 300 mm wall thickness possible) - e.g. pipe breakthroughs Our complete product program can be found in the Product Flyer 'Dry Core Drills'